28 Daytona Build
#1
Registered
Thread Starter
28 Daytona Build
Hey guys, I just picked up this 2003 28' Daytona that was derigged by it's previous owner before it was repo'd. Unfortunately he took a few things of very little value and will be a PITA for me to figure out how to put it back together. I"m going to need some help along the way. That's where you come in.
Here is how she looks today. I will get some more detailed pics of the dash and the engine compartment tomorrow with my DSLR.
Everything from the dash was removed with the exception of the throttle/shifters and the hydraulic helm. If anyone has a '03 28 with twins that is willing to share pics let me know. I think that that will be my best bet to figure out this jigsaw puzzle.
Here is how she looks today. I will get some more detailed pics of the dash and the engine compartment tomorrow with my DSLR.
Everything from the dash was removed with the exception of the throttle/shifters and the hydraulic helm. If anyone has a '03 28 with twins that is willing to share pics let me know. I think that that will be my best bet to figure out this jigsaw puzzle.
#2
Registered
Thread Starter
#3
Gold Member
Gold Member
Join Date: Jan 2011
Location: Omaha Ne
Posts: 1,482
Likes: 0
Received 0 Likes
on
0 Posts
That sucks when people strip boats like that knowing they are going to be repo'd. If that isn't premeditated I don't know what is! Maybe you could call Bob Leach@ Eliminator & give him the hull # to see what the boat was originally equipped with. Randy
#8
Gold Member
Gold Member
Join Date: Jan 2011
Location: Omaha Ne
Posts: 1,482
Likes: 0
Received 0 Likes
on
0 Posts
Probably because he didn't have the right tools in his stolen craftsman box or didn't have the time before the repo men arrived. Either way at least you lucked out on a couple of spendy items. Did he cut the hoses or take the fittings loose? What about the wiring? Randy