33 Daytona Build - The Red Rocket !!
#41
Registered User
VIP Member
Thread Starter
Join Date: Jul 2007
Location: Alta Loma, CA
Posts: 859
Likes: 0
Received 0 Likes
on
0 Posts
Update !!!
Gauges installed and shifter in place...Rear vents later today...
[ATTACH=CONFIG]537953[/ATTACH]
[ATTACH=CONFIG]537954[/ATTACH]
[ATTACH=CONFIG]537955[/ATTACH]
[ATTACH=CONFIG]537953[/ATTACH]
[ATTACH=CONFIG]537954[/ATTACH]
[ATTACH=CONFIG]537955[/ATTACH]
#42
Registered User
VIP Member
Thread Starter
Join Date: Jul 2007
Location: Alta Loma, CA
Posts: 859
Likes: 0
Received 0 Likes
on
0 Posts
Everything's in place and at the ready to bang this one out...
[ATTACH=CONFIG]540616[/ATTACH][ATTACH=CONFIG]540617[/ATTACH][ATTACH=CONFIG]540618[/ATTACH][ATTACH=CONFIG]540619[/ATTACH]
[ATTACH=CONFIG]540616[/ATTACH][ATTACH=CONFIG]540617[/ATTACH][ATTACH=CONFIG]540618[/ATTACH][ATTACH=CONFIG]540619[/ATTACH]
#43
Registered User
VIP Member
Thread Starter
Join Date: Jul 2007
Location: Alta Loma, CA
Posts: 859
Likes: 0
Received 0 Likes
on
0 Posts
Moving along...putting motors in next week...
[ATTACH=CONFIG]540973[/ATTACH]
[ATTACH=CONFIG]540974[/ATTACH]
[ATTACH=CONFIG]540975[/ATTACH]
[ATTACH=CONFIG]540973[/ATTACH]
[ATTACH=CONFIG]540974[/ATTACH]
[ATTACH=CONFIG]540975[/ATTACH]
#45
Registered User
VIP Member
Thread Starter
Join Date: Jul 2007
Location: Alta Loma, CA
Posts: 859
Likes: 0
Received 0 Likes
on
0 Posts
Normal "build cycle" is 13-16wks...some less, some more...lots of variables in play here.
There's been some work "behind the scenes" with respect to the custom motors, marine application conversion, trans work, etc.
There's been some work "behind the scenes" with respect to the custom motors, marine application conversion, trans work, etc.
#46
Registered User
VIP Member
Thread Starter
Join Date: Jul 2007
Location: Alta Loma, CA
Posts: 859
Likes: 0
Received 0 Likes
on
0 Posts
UPDATE !!
Motor's are just about ready to install. Trans are back, externals mounted, etc.
[ATTACH=CONFIG]542492[/ATTACH]
Low water pickups in place and bottom detailed:
[ATTACH=CONFIG]542493[/ATTACH]
[ATTACH=CONFIG]542495[/ATTACH]
[ATTACH=CONFIG]542494[/ATTACH]
Motor's are just about ready to install. Trans are back, externals mounted, etc.
[ATTACH=CONFIG]542492[/ATTACH]
Low water pickups in place and bottom detailed:
[ATTACH=CONFIG]542493[/ATTACH]
[ATTACH=CONFIG]542495[/ATTACH]
[ATTACH=CONFIG]542494[/ATTACH]
#50
Registered User
VIP Member
Thread Starter
Join Date: Jul 2007
Location: Alta Loma, CA
Posts: 859
Likes: 0
Received 0 Likes
on
0 Posts