1984 31' Excalibur Project update
#13
Registered
Re: 1984 31' Excalibur Project update
VERY VERY NICE!! I cant wait to see it done. I have a 31 here at the shop that we are working on right now. It is getting a pair of 511" 750's on #3 drives. Ill take some pictures.
#14
Registered
Thread Starter
Join Date: Oct 2000
Location: Lombard, Il
Posts: 650
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1984 31' Excalibur Project update
I'm still plugging away.
Here's the new dash. Notice that the font on the dash matches the font on the autometer gages.
Here's the new dash. Notice that the font on the dash matches the font on the autometer gages.
#16
Registered
Thread Starter
Join Date: Oct 2000
Location: Lombard, Il
Posts: 650
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1984 31' Excalibur Project update
It's alive!
1 month short of 3 years!
I posted some dash photos in the general section.
I installed the stainless rails around the back after these photos. The inside of the hatch will get painted this winter.
1 month short of 3 years!
I posted some dash photos in the general section.
I installed the stainless rails around the back after these photos. The inside of the hatch will get painted this winter.
#20
Registered
Thread Starter
Join Date: Oct 2000
Location: Lombard, Il
Posts: 650
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1984 31' Excalibur Project update
It carries the nose much better with the bravos.
GPS took a crap right before we sorted out a fuel delivery problem.
Before fuel fix, when the GPS was working:
67.9 MPH @ 4600 RPMs
Fixed the fuel problem, lost the GPS:
4900 RPMs speed unknown.
Turning 26 bravo 1 4 blades
GPS took a crap right before we sorted out a fuel delivery problem.
Before fuel fix, when the GPS was working:
67.9 MPH @ 4600 RPMs
Fixed the fuel problem, lost the GPS:
4900 RPMs speed unknown.
Turning 26 bravo 1 4 blades
Last edited by Zanie; 09-21-2006 at 12:22 PM.