Anybody got a 27 with a bravo?
#1
Registered
Thread Starter
Anybody got a 27 with a bravo?
Looking for some dimensions on a 27 notched transom with a bravo? I would like to know what the distance is between the bottom of the notched transom and the bottom of the gimbal?
#2
Registered
Re: Anybody got a 27 with a bravo?
Not sure of that dimension but we set one up with the x dimension at 17.5 and worked great , going up any higher you might have to use 5 blade to get any gain, if you mount drive higher you can always add spacers and experiment with different combos. It all depends on how much time and money you want to spend to maybe find a couple of mph.We ended up with ours at about 17.5 running bravo 1 4blade.With the spacers removed the boat ran worse, but 5 and 6 blade props were not available back then.
Thread
Thread Starter
Forum
Replies
Last Post
1BIGJIM
Drives and Lower Units
3
06-10-2008 12:46 PM
rslick
General Q & A
13
06-15-2005 11:54 PM