80 24 Excalibur project
#1
Registered
Thread Starter
Join Date: May 2006
Location: Fair Haven, NY
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I am a newer member and just picked up a 24 Excalibur for a winter project in the Syracuse area in NY does anyone recognize it or have any history?
#2
Registered
Thread Starter
Join Date: May 2006
Location: Fair Haven, NY
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
the engine is currently being stroked to a 540cid hopefully to be pushing 700-750hp... does anyone have any info on whether the x dimension on the drive should be changed and if so how far?
#4
Registered
Thread Starter
Join Date: May 2006
Location: Fair Haven, NY
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
No, I am sticking with the Trs and merc two trans which has been reworked with more clutch plates etc to hold the hp. Iv always had good luck with the trs so i figured may as well stick with it. Iv been told that raising the X dimension could give me more speed just dont want to go to far, figured somebody has done it with luck?
Last edited by 78tahiti; 07-30-2012 at 06:10 PM.
#7
Registered
Join Date: Jan 2005
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
nice project . i had a 79 24 with trs and changed it to bravo with a 750 hp blower motor . it did go faster but it had a lot more chinewalk i think you are making the right choice for this style boat. I now have a 1980 32 ft excalibur with twins and love it . It is great for the Lake of the ozarks. good luck with project .Kurt