Sean H

[QUOTE=glassdave]geeze dude . . yer worse than a chik . . lemmie guess . . you want the deck hatch filled back in and off set to one side and now the boat is gonna be red and white.

QUOTE]


i like those ideas......

did you get my email with the pics? any ideas?

glassdave

spent some time fabbing up some flat stock for the lip that will be bonded under the deck hatch opening. this will serve as a shoulder for the hatch to rest on when closed. this is made of 4 layers of 1808 bi-ax and the center section that was cut out provided the pieces to fill in the vent holes that were filled an the rear sides of the boat (alittle thinking ahead on that one ).

these pics actually came from my new cell phone. motorola v710 pretty nice quality, i am really impressed with this phone

glassdave

. . filled in those holes that were not to clearly marked on the dash . . .and the rest of 'em

glassdave

got my composite panel yesterday for the windscreen riser so i got started on that. this is a composite panel from Coosa and will serve as a core for the final piece. i use this stuff because it shapes rather easy and gives my fiberglass a good base to bond to. building the mock up out of the foam gave me a decent template to work with. transfered it to a cardboard cutout and layed out my general shape on the board. i cut the leading edge first and will not cut the rear arc out until i have it right where i want it. the windscreen guy has requested a 5/8 inch back set to accomodate a 1/2 inch piece of lexan.

glassdave

Sean . . no hindges in the UPS or FedEx truck today. i am going to look over the pics tonight after i get done surf'in porn

hey . . maybe we could make this the first closed canopy 30 spectre if i leave that riser panel uncut.

Sean H

you could put a lexan hatch in the bow and it could be a "lay down" boat instead of a sit down.....

looks good though, i will seek alternate methods for the hinges.....

masher44

Dave got your name on I see

Sean H

dave and i have been discussing the deck graphics, i think i just found them!!

glassdave

uh-oh . . . .




so i'm guess'n Mashers ideai is out . . . he sent me a PM and offered to pay for that part of it

masher44

I will pay for the whole thing if he rides around for the summer with that on there....