Repairing a rock chip in the gel.
#1
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I have read the other posts about the west marine stuff. does that stuff work good, or is this something i should have done by a pro?
If it is something i can do, can you give me step by step instructions on how to do it. i have 3 rock chips about 1/8" deep.
thanks-
If it is something i can do, can you give me step by step instructions on how to do it. i have 3 rock chips about 1/8" deep.
thanks-
#3
Neno the mind boggler
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
![Default](/forums/images/icons/icon1.gif)
how big are the chips. doing the repair ist to hard but matching the color is where experience help. also where are the chips located at on the boat
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#5
![Default](/forums/images/icons/icon1.gif)
I have one too.... dam dock neighbor's kids throwing rocks off the dock.
I was just gonna try to keep the repair small and drop a little gel in the hole.
![Mad](/forums/images/smilies/mad.gif)
I was just gonna try to keep the repair small and drop a little gel in the hole.