eliminator219

Had a couple of gouges and I filled them now I would like to match the gel coat. I'm wanting to spray the gel. what do I need to use to thin it enough to spray? also how much hardner do I put in? The section is about One foot long by about six inches right below the rub rail, I have new rub rail..
The gough was only about three inches long and about 1 eights in. deep. by the time I sanded everything down I ended up with the one foot length to match up with the rest of the hull, By the way, Im dealing with white. any sugestions or advise. I was going to paint and blend in but just cant find the right shade of white..so I thought I would spray gelcoat.
eliminator219

Audiofn

Chack out www.minicraft.com They have lots of info and are the best that I have ever found at matching.

Jon

eliminator219

Thanks for the information.. I took the boat to my auto paint shop and they hit it with a computer match gun and it gave the color and they were able ato give me a corect match, I hope!! haven't done it as of yet..
regards,