Prep Work for Painting Engine Compartment
#12
Registered
Join Date: Aug 2005
Location: Marietta, Ga.
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts
Monstaaa, I noticed all of the ones in the pics above were painted before. Will the same steps apply to one that was mostly carpeted? I am getting ready to do mine and have stripped the carpet out. The work looks really good!!
#14
Registered
Join Date: Feb 2005
Location: long island, newyork
Posts: 2,551
Likes: 0
Received 2 Likes
on
2 Posts
most builders use gelcoat in the bilge over the glass work. either way follow the steps above and you ll have no worries. just make sure you start with 80 or 100 on the 8 ". it is important to remove the top layer of gel because of its prosity, which will contaminate and therefore diminish the end results of longevity and appearance of your work.
good luck to all
good luck to all
Thread
Thread Starter
Forum
Replies
Last Post
mcraymond3
General Boating Discussion
125
04-04-2014 11:55 PM
TeamPSI
Fiberglass and Paint
7
02-10-2007 07:43 AM