how to fill dash holes
#24
Charter Member #232
Charter Member
Did you taper out the edges MF both front and back of the hole? If so you should be fine.
__________________
Put your best foot forward!
Put your best foot forward!
#29
Neno the mind boggler
VIP Member
Thread Starter
pretty similar. i use a course round rasp to prep the hole. you cant just fill in the screw hole as there are usually some fine stress cracks around it from when it was first driven in. Are you painting over or gelcoat?
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#30
Registered
Join Date: Feb 2005
Location: nokomis florida
Posts: 405
Likes: 0
Received 0 Likes
on
0 Posts
painting it, heres my new dash, this 21 shadow had a goofy z shape, I decided to use the smartcraft screen so I cut it out as well as made a side console to house switches etc, also put a new transom in to support 18 inches of set back and cut out the splashwell and built a new rear section with hatch