Go Back  Offshoreonly.com > Technical > Fiberglass and Paint
Can't get a gloss on gel - Help >

Can't get a gloss on gel - Help

Notices

Can't get a gloss on gel - Help

Thread Tools
 
Old 12-29-2020, 07:25 PM
  #21  
Registered
 
Join Date: May 2018
Location: Western Pennsylvanoa
Posts: 577
Received 109 Likes on 83 Posts
Default

I'm thinking of just getting my front deck clear-coated because of same issue since it still has some shine yet.
what's the +/- of clear-coat?
PA.WOODCHUCK is offline  
Old 12-29-2020, 08:06 PM
  #22  
Registered
Thread Starter
 
Rookie's Avatar
 
Join Date: Jan 2003
Location: Grand Rapids, MI
Posts: 5,753
Received 1,249 Likes on 604 Posts
Default

Originally Posted by PA.WOODCHUCK
I'm thinking of just getting my front deck clear-coated because of same issue since it still has some shine yet.
what's the +/- of clear-coat?
My hull sides had clear over the gel coat and in places it was flaking off. Where it was cleared over the paint it it bonded very well.
I did clear mine this summer though (full paint job) and was finally able to achieve an acceptable a gloss.
.
Rookie is offline  
Old 12-29-2020, 11:36 PM
  #23  
Registered
 
Join Date: Aug 2012
Location: Collierville, TN and Pickwick Lake
Posts: 2,291
Received 394 Likes on 164 Posts
Default

Originally Posted by Rookie
I believe I spent enough time with the each grit. I was only working a small area a square foot or so. I spent hours on just one area. Also with all kinds of products not only sanding.
At least you departed from the "working a small area" mentality....lol. I'd say you've overcome your "can't get a gloss" issue.
payuppsucker is offline  
The following users liked this post:
Rookie (12-30-2020)
Old 12-30-2020, 08:21 AM
  #24  
Registered
 
Join Date: Mar 2019
Location: Perdido Key, Madison, NC
Posts: 1,003
Received 306 Likes on 154 Posts
Default

Sounds like you have tried and (with a completely understandable margin of safety-do no harm) have not been satisfied. I would probably take it to (or get a visit from a mobile) professional detailer/restorer and contract to have him do one of the worst (and most visible) areas. If it is satisfactory you can then decide to tackle it more aggressively or contract to have it done.
F14A water jet is offline  
The following users liked this post:
Rookie (12-30-2020)
Old 12-30-2020, 08:56 AM
  #25  
Registered
 
Join Date: Aug 2012
Location: Collierville, TN and Pickwick Lake
Posts: 2,291
Received 394 Likes on 164 Posts
Default

Originally Posted by F14A water jet
Sounds like you have tried and (with a completely understandable margin of safety-do no harm) have not been satisfied. I would probably take it to (or get a visit from a mobile) professional detailer/restorer and contract to have him do one of the worst (and most visible) areas. If it is satisfactory you can then decide to tackle it more aggressively or contract to have it done.
He is a little past that now.
See post #22 above.
payuppsucker is offline  
The following users liked this post:
Rookie (12-30-2020)
Old 12-30-2020, 09:17 AM
  #26  
Registered
 
Join Date: Mar 2019
Location: Perdido Key, Madison, NC
Posts: 1,003
Received 306 Likes on 154 Posts
Default

Originally Posted by payuppsucker
He is a little past that now.
See post #22 above.
Shoot...I'm behind on my required reading.
Thanks...
F14A water jet is offline  
Old 12-30-2020, 09:26 AM
  #27  
Registered
Thread Starter
 
Rookie's Avatar
 
Join Date: Jan 2003
Location: Grand Rapids, MI
Posts: 5,753
Received 1,249 Likes on 604 Posts
Default

Originally Posted by payuppsucker
He is a little past that now.
See post #22 above.

Originally Posted by F14A water jet
Shoot...I'm behind on my required reading.
Thanks...
Or click on the link in post #18 or below.
Extreme Measures... Make Over Edition
Rookie is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.