want to go faster - props?
06-08-2005, 03:27 PM
#1
Registered
Thread Starter
Join Date: May 2005
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
want to go faster - props?
i'm new to this sight
i have a 90' wellcraft 26' nova st w/step hull...rare......the boat has stock 350mags 270hp each. the boat dry according to specs is 5500 lb's. ...i'm running mirage 3blade 23p x 14 dia.......last year i was getting 64 gps at 5200 rpm. i had them cupped to supposedly add a half pitch for alittle top end and lwr WOT rpm...........now i'm at 5000 rpm at about 63mph.....i'm trying to get a little more top end....is there anyway of trying out props or any reasonable bolt-on speed
any ideas on bolt on top end without killing the pocket book.
any info is greatly appreciated
i have a 90' wellcraft 26' nova st w/step hull...rare......the boat has stock 350mags 270hp each. the boat dry according to specs is 5500 lb's. ...i'm running mirage 3blade 23p x 14 dia.......last year i was getting 64 gps at 5200 rpm. i had them cupped to supposedly add a half pitch for alittle top end and lwr WOT rpm...........now i'm at 5000 rpm at about 63mph.....i'm trying to get a little more top end....is there anyway of trying out props or any reasonable bolt-on speed
any ideas on bolt on top end without killing the pocket book.
any info is greatly appreciated
06-08-2005, 05:35 PM
#2
Toxic FORMULA
Platinum Member
Re: want to go faster - props?
Originally Posted by PARMENTIER123
any ideas on bolt on top end without killing the pocket book.
