Loose McLeod Footrests in a Fastech...
03-13-2006, 09:27 PM
#1
21 and 42 footers
Platinum MemberThread Starter
Loose McLeod Footrests in a Fastech...
The footrests in my 312 rattle. I can get to the bolts through the lower step, but the nut under the floor spins freely. How do you get to THAT nut???
03-15-2006, 02:27 PM
#3
Forum Regulator
VIP Member
Re: Loose McLeod Footrests in a Fastech...
Find an access point under the dash and shove one of your kids up there with a monkey wrench. 
I'll take Faith out to dinner.
I'll take Faith out to dinner.
03-21-2006, 08:00 PM
#4
21 and 42 footers
Platinum MemberThread Starter
Re: Loose McLeod Footrests in a Fastech...
TTT
I have removed the white footrest and have easy access to the 4 bolts that secure the assembly to the floor. The 4 bolts need to be tightened to keep the assembely from shaking and rattling. When I try to tighten them the nut UNDER the floor turns too. Is there anyway to reach those 4 nuts? I've tried reach through the acces plates in the cabin closets but they don't go all the way through.
I have removed the white footrest and have easy access to the 4 bolts that secure the assembly to the floor. The 4 bolts need to be tightened to keep the assembely from shaking and rattling. When I try to tighten them the nut UNDER the floor turns too. Is there anyway to reach those 4 nuts? I've tried reach through the acces plates in the cabin closets but they don't go all the way through.
