RedDog382

Thanks for the pics, Garrett.

Are the brackets just secured to the frame of the step in the engine compartment?

Did you use stainless or aluminum brackets?

FormulaM2Formula

Hi Chris,

Duh, I should have photographed that too. One of the pics shows a ~1.5" (or 2"?) x 3/4" aluminum bar that the strainer mounts on and goes to the frame step and on past it probably another 8 to 12 inches. Then there is a 1/4" x 2" aluminum flat piece that goes up from the bar to the angle that is part of the step mount where the wood screws down. The 1/4 x 2 also goes down to the stringer.

I'll take another pic of the mount system, but I can't get back in the boat for about 2 weeks.

Garrett