357 Sr1 Needed
03-07-2007, 09:18 PM
#1
Registered
Thread Starter
357 Sr1 Needed
Hey Guys,
I need help locating a clean 1985 to 1987 357 SR1 for a buddy of mine. He is looking to spend about 35,000 for a solid boat. He does not mind having to do machincal work or interior but we need to stay away from glass work. Does any one know of any leads? He is willing to travel to pick it so any location on the east coast would be perfect.Please PM me any info you may have.
Thanks in advance
Nordic95
I need help locating a clean 1985 to 1987 357 SR1 for a buddy of mine. He is looking to spend about 35,000 for a solid boat. He does not mind having to do machincal work or interior but we need to stay away from glass work. Does any one know of any leads? He is willing to travel to pick it so any location on the east coast would be perfect.Please PM me any info you may have.
Thanks in advance
Nordic95
03-07-2007, 09:57 PM
#2
Charter Member #232
Charter Member
Should be able to find something for around that.... Little more money and I am guessing he could get a VERY clean one.
__________________
Put your best foot forward!
Put your best foot forward!
03-08-2007, 06:24 AM
#3
Registered
Join Date: Oct 2005
Location: Lake of the Ozarks MO
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Hey Guys,
I need help locating a clean 1985 to 1987 357 SR1 for a buddy of mine. He is looking to spend about 35,000 for a solid boat. He does not mind having to do machincal work or interior but we need to stay away from glass work. Does any one know of any leads? He is willing to travel to pick it so any location on the east coast would be perfect.Please PM me any info you may have.
Thanks in advance
Nordic95
I need help locating a clean 1985 to 1987 357 SR1 for a buddy of mine. He is looking to spend about 35,000 for a solid boat. He does not mind having to do machincal work or interior but we need to stay away from glass work. Does any one know of any leads? He is willing to travel to pick it so any location on the east coast would be perfect.Please PM me any info you may have.
Thanks in advance
Nordic95
03-08-2007, 09:32 AM
#4
Registered
Join Date: Nov 2003
Location: 1 Flu Ovr KuKos Nest-WI
Posts: 9,950
Likes: 0
Received 0 Likes
on
0 Posts
I know of one locally in WI that is almost new condition and I'm not lying. He has owned it about 10 yrs. Fresh water. Red.
1988 I think but he would be around 50k and that's if he decides that he lets the boat go. He also sells Black Thunder's part time. He is on BT web site and his name is Greg Sunilla.
1988 I think but he would be around 50k and that's if he decides that he lets the boat go. He also sells Black Thunder's part time. He is on BT web site and his name is Greg Sunilla.
03-08-2007, 05:11 PM
#5
Registered
Nordic,
PM me and we can exchange info I have on a 357 in Baltimore, going on market in two weeks, so timing is good. Person asked that I not post their info. Just rying to be respectful.
PM me and we can exchange info I have on a 357 in Baltimore, going on market in two weeks, so timing is good. Person asked that I not post their info. Just rying to be respectful.
03-08-2007, 10:12 PM
#6
Registered
Join Date: Aug 2006
Location: IAD/FLL
Posts: 2,090
Likes: 0
Received 0 Likes
on
0 Posts
03-08-2007, 10:18 PM
#7
Registered
Thread Starter
Here's one heck of a rig...
http://adcache.boattraderonline.com/6/0/8/88042608.htm
http://adcache.boattraderonline.com/6/0/8/88042608.htm
Keep searching for us,we will find the right boat sooner or later.
By the way,dont forget I have your two transoms and custom cams waiting for you
You know you want them
Just tell me when to ship them out
Nordic95
03-08-2007, 10:57 PM
#8
Registered
Join Date: Aug 2006
Location: IAD/FLL
Posts: 2,090
Likes: 0
Received 0 Likes
on
0 Posts
Oh sure, rub it in bud! As far as I'm concerned the transoms are "fixed" for now...duct tape over the holes kept me dry all day
Hmmm....I might have just enough room to do a cam swap without removing the motors...but I'm not doing anything till I get off my duff and get those riser spacers and bracket from RM. It's killing me that I haven't done that yet.
Some of the asking prices seem way out of line, but don't let that scare him away. 70-75% of asking might sound insulting, but it might just be accepted. Does he have a color preference?
Hmmm....I might have just enough room to do a cam swap without removing the motors...but I'm not doing anything till I get off my duff and get those riser spacers and bracket from RM. It's killing me that I haven't done that yet.
Some of the asking prices seem way out of line, but don't let that scare him away. 70-75% of asking might sound insulting, but it might just be accepted. Does he have a color preference?
03-08-2007, 11:07 PM
#9
Registered
Thread Starter
Oh sure, rub it in bud! As far as I'm concerned the transoms are "fixed" for now...duct tape over the holes kept me dry all day
Hmmm....I might have just enough room to do a cam swap without removing the motors...but I'm not doing anything till I get off my duff and get those riser spacers and bracket from RM. It's killing me that I haven't done that yet.
Some of the asking prices seem way out of line, but don't let that scare him away. 70-75% of asking might sound insulting, but it might just be accepted. Does he have a color preference?
Hmmm....I might have just enough room to do a cam swap without removing the motors...but I'm not doing anything till I get off my duff and get those riser spacers and bracket from RM. It's killing me that I haven't done that yet.
Some of the asking prices seem way out of line, but don't let that scare him away. 70-75% of asking might sound insulting, but it might just be accepted. Does he have a color preference?
