Project......382
#21
Diamond Member #001
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Coastal North Carolina
Posts: 4,808
Likes: 0
Received 5 Likes
on
4 Posts
Did I mention we're doing some touch-up work (dock rash), adding another coat of silver pearl on the whole thing and cleaning up the transom cutouts?
Somebody stop me...
Somebody stop me...
__________________
Retired! Boating full-time now.
Retired! Boating full-time now.
Last edited by C_Spray; 11-18-2007 at 08:26 PM.
#25
Diamond Member #001
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Coastal North Carolina
Posts: 4,808
Likes: 0
Received 5 Likes
on
4 Posts
Poll on valve cover art. (My vote counts more than everyone else's combined, but I'd still like to hear opinions.) The idea in the right hand picture is that the outlines of the stripes, or (in the case of the center option) the background is "chrome" mylar.
__________________
Retired! Boating full-time now.
Retired! Boating full-time now.
Last edited by C_Spray; 12-03-2007 at 10:54 AM.
#26
VIP Member
VIP Member
C-spray - good time to check your supreme cables for trim tabs - I did not when I had engines out- one cable locked up, and the other was sticking . Might want to hand cycle the cables to see if they have issues - My 382 in a 1996 -
Valve cover vote is for either of the middle ones -
Valve cover vote is for either of the middle ones -
#29
Diamond Member #001
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Coastal North Carolina
Posts: 4,808
Likes: 0
Received 5 Likes
on
4 Posts
How 'bout if I substitute engine-turned stainless instead of chrome mylar for the middle one?
__________________
Retired! Boating full-time now.
Retired! Boating full-time now.