Volvo Penta DPX prop position
05-16-2008, 11:21 AM
#21
Registered
Join Date: Aug 2002
Location: Eastern Lake Ontario
Posts: 2,896
Likes: 0
Received 3 Likes
on
3 Posts
I may be opening up a whole new can of worms here....
....but has anyone had good or bad results after trying to make small repairs to their props themselves...i.e. with a file and/or sandpaper?
I have a few small nicks on the leading edges of my front and rear props that would probably smooth out nicely with some 400 grit paper. Do I risk throwing off the balance, or worse?
....but has anyone had good or bad results after trying to make small repairs to their props themselves...i.e. with a file and/or sandpaper?
I have a few small nicks on the leading edges of my front and rear props that would probably smooth out nicely with some 400 grit paper. Do I risk throwing off the balance, or worse?
Thread
Thread Starter
Forum
Replies
Last Post
silversupercoupe
Drives and Lower Units
1
04-30-2008 02:39 PM
