sprink58

I think it's the shift/clutch cone. It either needs to be replaced or lapped in with valve lapping compound to make it uniformly engage the gear.

Unlimited jd

That's a great idea!!! Lol

sprink58

Yeah...Imagine that...LOL

sprink58

UPDATE:

Turns out that the newly hubbed prop is still slipping and needs to be re-hubbed again!!!

Tommy Hoffstetter had two props done at the same time and both of his failed. We will give the prop shop the opportunity to redeem themselves before we cast the first stone...

Crude Intentions

Hope it's just the prop John.

sprink58

Mike...It is. I swpped back and forth between drives and ran the starboard side in reverse...it bllew out at 1800 RPM...port drive pulled fine with tyhe other prop...deffinoitely the prop.

masi242

This is good to here at least your not pulling drives and such, it will be nice to go for a ride with out problems.

sprink58

Tommy is pushing me to jump in and do the poker run from Miami to Key Largo this weekend...I think I'm going to do it.

masi242

Good for you, a little time out of the house will be good. Just remember we need pics, Miami sounds a little better than Massachusetts right now.

FIXX

Start livin brother..