So I snapped a crank in my 311 memorial day weekend !
#11
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Another
#12
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
This was the nerve racking part coming out of the boat!
#13
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
WTF! Who does this?
#14
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Port engine still in the boat. This is the point at which I realized the heads were phucked. Hey, atleast it had the correct rocker arms!
#15
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
New heads on port engine! Bling!
#16
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Starboard engine back from machinist sporting a new internally balance Callies crank. Degreeing in Teague Stage I Billet Roller Cam.
#17
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I just really like this picture ...
#18
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Ready to drop back in. Took me a whole Sunday to finish assembly with trans and offshore mounts. Was a pita getting it out with the accessories on so I left them off going back in. Way easier!
#19
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
This is the point at which I took a big sigh of relief! While the Starboard engine was out I cleaned the bilge, tidied up some wiring, and added through hull flush kits since I am running TRS.
#20
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Intakes on, really wanted a set of Darts, maybe winter project....