Post pictures of your formula!!!
11-28-2004, 09:43 PM
#442
Registered
Thread Starter
Re: Post pictures of your formula!!!
Looks nice, I read in the other post that the tips are just double sided taped on cause you were anxious to see how it looked, but in the end do they have to be bolted or how are you going to secure them?
11-29-2004, 06:17 AM
#443
Registered
Join Date: May 2003
Location: In the Mountains
Posts: 11,772
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post pictures of your formula!!!
There are three screw holds in the flange, so will predrill the transom and use stainless screws, also will seal the flange to the transom with a sealing compound, but NOT 5200.
As soon as my riser gaskets arrive, we'll put the hose on the risers and bolt the risers/spacers in place, then insert the tips through the transom into the end of the hose. Then secure everything. CAN'T WAIT.......
As soon as my riser gaskets arrive, we'll put the hose on the risers and bolt the risers/spacers in place, then insert the tips through the transom into the end of the hose. Then secure everything. CAN'T WAIT.......
11-29-2004, 06:22 AM
#445
Registered
Join Date: May 2003
Location: In the Mountains
Posts: 11,772
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post pictures of your formula!!!
Actually that's what I had in mind, plus I've got a brand new tube of it I haven't opened yet.
When I bolt in the "D" rings, I'm going to use that as well rather than screw around with those rubber gaskets, unless there is some reason I'm not supposed to do that.
When I bolt in the "D" rings, I'm going to use that as well rather than screw around with those rubber gaskets, unless there is some reason I'm not supposed to do that.
12-17-2004, 10:34 PM
#448
Registered
Join Date: May 2003
Location: In the Mountains
Posts: 11,772
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post pictures of your formula!!!
Just finished spraying my exhaust riser "spacers". Getting together with "Gusman" tomorrow to basically finish it. All that should be left will be wetsanding the transom and a couple small odds and ends. Even got two new batteries tonight. Will post pix soon as it's done.
12-18-2004, 01:00 AM
#449
Registered
Thread Starter
Re: Post pictures of your formula!!!
Originally Posted by Formula Outlaw
Just finished spraying my exhaust riser "spacers". Getting together with "Gusman" tomorrow to basically finish it. All that should be left will be wetsanding the transom and a couple small odds and ends. Even got two new batteries tonight. Will post pix soon as it's done.
Good work and let us know when you finish.
12-19-2004, 10:07 PM
#450
Registered
Join Date: Aug 2003
Location: Flagstaff, AZ
Posts: 54
Likes: 0
Received 0 Likes
on
0 Posts
Re: Post pictures of your formula!!!
Been lurking from time to time and had to finnaly jump in. Saw the pic of the other 311 on Lake Powell. We are on the lake every other weekend or more all summer. Have not seen that boat but will be on the lookout. Here is mine. '90 311 Bravos. 450hp crate 502s. Dropped a valve in one Labor day. Back in the water this comming spring with roughly 600hp each. Cant wait.
