382 Fastech
Charter Member
05-10-2004, 12:01 AM
#22
Registered
Join Date: Mar 2004
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Engines are about 3 " lower in bilge at rear and 2 " lower in front. I installed 4 inch Teague oil coolers on middle stringer under both engines. Tight but fit good. All other rigging is same as bravo setup but reworked to fit Arenson setup. 4 L brackets to install motors. System is about 17500 per side much less than #6 drives(31000$ per side) and CG stays the same. Boat did 99 to 100 with Bravo's. 170 hrs on Bravo's and 6 breaks. Boat now has 10 hrs on drive and everything looks good so far.
