05 X listing to port side
VIP Member
10-16-2005, 10:15 PM
#12
Registered
Thread Starter
Join Date: Apr 2003
Location: Lake George N.Y.
Posts: 1,530
Likes: 0
Received 0 Likes
on
0 Posts
Re: 05 X listing to port side
Well,boats getting pulled out of the water this week and going
to the dealer for warranty repairs. I've gotta say that this port
side lean is driving me nuts! It leans just sitting at the dock.
I moved all my equipment to the starboard side. No difference.
Even when its just me in the boat,it leans to port. My dealer
says he check for water intrusion and found none. Has anyone
ran into this? Anyone out there with a late model Ex? Does your
boat sit perfectly level? My dealer says they may have to send
it back to Fountain. I don't know if thats a good thing or a bad
thing.
to the dealer for warranty repairs. I've gotta say that this port
side lean is driving me nuts! It leans just sitting at the dock.
I moved all my equipment to the starboard side. No difference.
Even when its just me in the boat,it leans to port. My dealer
says he check for water intrusion and found none. Has anyone
ran into this? Anyone out there with a late model Ex? Does your
boat sit perfectly level? My dealer says they may have to send
it back to Fountain. I don't know if thats a good thing or a bad
thing.
10-16-2005, 10:33 PM
#14
Registered
Thread Starter
Join Date: Apr 2003
Location: Lake George N.Y.
Posts: 1,530
Likes: 0
Received 0 Likes
on
0 Posts
Re: 05 X listing to port side
Yea,I'm just worried about the disassembly and reassembly
of the boat. You know that once mechanics take things apart
usually the don't go back together the same. You know,like
screws missing and things not lined up,scraches everywhere.
Sometimes your better off leaving well enough alone.Right
now that boat doesn't have a squeek or rattle in it.
of the boat. You know that once mechanics take things apart
usually the don't go back together the same. You know,like
screws missing and things not lined up,scraches everywhere.
Sometimes your better off leaving well enough alone.Right
now that boat doesn't have a squeek or rattle in it.
10-17-2005, 12:03 AM
#15
Platinum Member
Platinum Member
Re: 05 X listing to port side
Originally Posted by epeek
Yea,I'm just worried about the disassembly and reassembly
of the boat. You know that once mechanics take things apart
usually the don't go back together the same. You know,like
screws missing and things not lined up,scraches everywhere.
Sometimes your better off leaving well enough alone.Right
now that boat doesn't have a squeek or rattle in it.
of the boat. You know that once mechanics take things apart
usually the don't go back together the same. You know,like
screws missing and things not lined up,scraches everywhere.
Sometimes your better off leaving well enough alone.Right
now that boat doesn't have a squeek or rattle in it.
10-17-2005, 09:28 AM
#17
Registered
Thread Starter
Join Date: Apr 2003
Location: Lake George N.Y.
Posts: 1,530
Likes: 0
Received 0 Likes
on
0 Posts
Re: 05 X listing to port side
Originally Posted by Back4More
Do you have a pic of this list?
About how much is the difference from side to side?
Do you have a freshwater tank that might be full?
About how much is the difference from side to side?
Do you have a freshwater tank that might be full?
everything. No pic,but I'd say its a 1-2 inch difference
port to starboard.When I wash the floor,all the water runs
to port drain
Last edited by epeek; 10-17-2005 at 10:20 PM.
