Anyone with a 06 or 07 47 Lightning with 525s?
#1
Platinum Member
Platinum Member
Thread Starter
Join Date: Dec 2005
Location: Apollo Beach, FL.
Posts: 662
Likes: 0
Received 0 Likes
on
0 Posts
Anyone with a 06 or 07 47 Lightning with 525s?
If so could you take a picture of your center motors exhaust? I was told that CMI added a crossbar to help stabilize the exhaust. I want to have something made when I get my headers back if this is the case.
As you can see on my boat it has two supports going vertically, I was told now something connects those two supports. Thanks Mike
As you can see on my boat it has two supports going vertically, I was told now something connects those two supports. Thanks Mike
Last edited by DRIVEN1; 06-11-2006 at 08:15 AM.
#2
Registered
Join Date: Dec 2005
Location: Pennellville, NY
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone with a 06 or 07 47 Lightning with 525s?
Originally Posted by DRIVEN1
If so could you take a picture of your center motors exhaust? I was told that CMI added a crossbar to help stabilize the exhaust. I want to have something made when I get my headers back if this is the case.
As you can see on my boat it has two supports going vertically, I was told now something connects those two supports. Thanks Mike
As you can see on my boat it has two supports going vertically, I was told now something connects those two supports. Thanks Mike
www.chicagofountain.com
#3
Platinum Member
Platinum Member
Thread Starter
Join Date: Dec 2005
Location: Apollo Beach, FL.
Posts: 662
Likes: 0
Received 0 Likes
on
0 Posts
Re: Anyone with a 06 or 07 47 Lightning with 525s?
Originally Posted by BlondFountain
There is a 2005 47 foot on Shogren marine for sale with a bunch of pictures.
www.chicagofountain.com
www.chicagofountain.com
#4
Registered
Re: Anyone with a 06 or 07 47 Lightning with 525s?
Mike,
I have not seen one with a center bar. This would be easy to fabricate but be sure to do it the way CMI advises so you don't void warranty.
Scott Shogren
I have not seen one with a center bar. This would be easy to fabricate but be sure to do it the way CMI advises so you don't void warranty.
Scott Shogren