Stock HP's in 1983 Fountain 10meter
#1
Platinum Member
Platinum Member
Thread Starter
Join Date: Aug 2007
Location: New Carlisle, IN
Posts: 146
Likes: 0
Received 0 Likes
on
0 Posts
Stock HP's in 1983 Fountain 10meter
What was stock HP's in 1983 for the 10m. Executioner? I have a chance to buy some 454's at 330HP. Is that enough for a weekend cruiser? Thanks Harry
#4
Registered
you could get 330's, 370's, 400's, 420's or bigger. With 330's I don't know if you will be happy with them. They usually run good, but will only push the boat to the high 60's. When I bought my 10M the motors were about 420 hp, and it only did 72mph.
#5
Registered
Join Date: May 2005
Location: LOTO Performance Boat Center
Posts: 3,897
Likes: 0
Received 0 Likes
on
0 Posts
Don't buy 330's they are junk and will hurt resale if you plan to resell! At the minimium you need 454 mags, I would find some used 500 carbs if it were me. 330's are 330's not much you can do to them if you want to go faster, I doubt they would push that boat in the mid 60's.
Thread
Thread Starter
Forum
Replies
Last Post
chevalcabre
Fountain
16
05-13-2007 07:52 PM