Fountain 38 Lightning
#81
Registered
Join Date: Jan 2005
Location: Akron, Ohio
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
How was the transom? I would think having all new stringers would be a good selling point. I know to well that it is always an issue with older boats as you will soon see. If you have it all redone, the next surveyor wouldn't find any problems.
#82
Registered
Join Date: Aug 2007
Location: Port Deposit, MD
Posts: 622
Likes: 0
Received 0 Likes
on
0 Posts
Another thing that would scare me is totally disassembling the cabin, I can't imagine it would all go back together properly...?
There was a 7' area from the through hulls at the head almost all the way to the bow from the vertical section of the hull to the rub rail too. Looking at it from an access panel inside the head you could see fuzz on the fiberglass. There was also some stalag tight looking growths every so often.
This was the ONLY area of the hull besides the transom that even read on the meter at all (but, of course, it read pegged at some points)
Last edited by PJDiesel; 03-27-2008 at 05:56 PM.