2000,33 fever w/ 502mags
10-26-2008, 04:45 PM
#1
Registered
Thread Starter
Join Date: Mar 2007
Location: mattoon il
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
2000,32 fever w/ 502mags
i have been winterizing my boat, by suckin 10 gal of antifreeze through freshwater flush for a couple of years now(it works), because i physicaly can not reach the water presure and knock sensor by any means to drain block! how do the rest of you do it? and how do the good foutain dealers do it?
Last edited by 266ltd; 11-05-2008 at 10:39 AM.
11-03-2008, 01:27 PM
#3
SeaRay Sundancer
Gold Member
Join Date: Nov 2005
Location: SW Missouri
Posts: 2,914
Likes: 0
Received 0 Likes
on
0 Posts
I did that this yr, only b/c i intend on having it test drivin and sold soon. But on a normal yr when im not selling a boat i will run antifreeze, fog engine, drain anti from system, and change both drive and engine oil.
11-03-2008, 01:43 PM
#4
Forum Regulator
VIP Member
Do you have a fresh water flush fitting where you can put a hose right into the sea-water system? I much prefer this method over muffs.
Most dealers do it with the muffs if you don't have a hose input.
Most dealers do it with the muffs if you don't have a hose input.
11-04-2008, 11:01 AM
#5
Registered
Thread Starter
Join Date: Mar 2007
Location: mattoon il
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
yes i run pure prop.glycol thru the fresh water flush sys. but i wish i could reach and pull fittings for knock, water, and cool fuel so i could make sure that there is no debris in the block and fuel sys! I was just curios how dealers do it for liability reasons, because i had a extremly small guy in there and he could not reach them either! know matter what way he contorted himself!
Sorry 32' thats more like it!1
11-06-2008, 06:49 PM
#8
Banned
Join Date: Apr 2008
Location: Boca/Brentwood
Posts: 2,004
Likes: 0
Received 0 Likes
on
0 Posts
