safe rpm to go in to gear
#11
Registered
Thread Starter
Join Date: Jun 2008
Location: wendell,nc
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
This is what I found so far, timing less than 10* intake gaskets at coolant passages blown, 4 plug wires burned from previous exaust leak 8 fouled plugs, msd dist wires spade connectors( not sealed) corroded. dist cap all 9 terminals green and pitted so bad that they are flaking,
#13
Registered
Join Date: Oct 2008
Location: Bird Nest
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Here are videos of the boat from the previous owner
http://s301.photobucket.com/albums/n...nt=Boat014.flv
http://s301.photobucket.com/albums/n...t=MOV04786.flv
http://s301.photobucket.com/albums/n...t=MOV04785.flv
http://s301.photobucket.com/albums/n...t=MOV04788.flv
http://s301.photobucket.com/albums/n...nt=Boat014.flv
http://s301.photobucket.com/albums/n...t=MOV04786.flv
http://s301.photobucket.com/albums/n...t=MOV04785.flv
http://s301.photobucket.com/albums/n...t=MOV04788.flv
#14
Registered
Thread Starter
Join Date: Jun 2008
Location: wendell,nc
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
finished engine work last night, started less than 1 full turn, idles at 1k. also found 3 melted plugs, took bore scope and checked pistons OK, going to switch all connectors over to weather packs. will have blower intake surfaced and ready for winter rebuild.
![Drink](/forums/images/smilies/drink.gif)
#15
Registered
Join Date: Oct 2008
Location: Bird Nest
Posts: 340
Likes: 0
Received 0 Likes
on
0 Posts