Want to improve hole shot on 29' Fountain
09-30-2010, 09:25 AM
#31
Registered
Join Date: Aug 2010
Location: Ottumwa, IA
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Ah Ic
Ah IC I don't know what position that is in. Can you tell by a quick visual check or do you have to remove the hardware to see this? I'm guessing that we want the drive to be able to go negative to get out of the hole better? On a side note this out drive was upgraded didn't come from the factory this way so who knows how they put it.
Thanks
Thanks
09-30-2010, 09:47 AM
#32
Registered
Join Date: Feb 2002
Location: Lake Michigan
Posts: 6,627
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, You can tell by just looking at it...if you know what your looking for.
The drive mounting area is more of a slotted surface and the cylinder center line and through bolt will be on the rear side of this surface. I can post pics of both positions but not till this weekend. If I have time at work I will look for drive pics online to see if its visible.
The drive mounting area is more of a slotted surface and the cylinder center line and through bolt will be on the rear side of this surface. I can post pics of both positions but not till this weekend. If I have time at work I will look for drive pics online to see if its visible.
