97 35 Fountain
07-29-2010, 08:21 PM
#12
Registered
Join Date: Jul 2010
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
I hope that the new rebuilt engine for you truck boat will work properly and I think it has a good quality. By the way, how much did it cost you?
Last edited by trophyyride; 08-10-2010 at 07:17 PM.
07-30-2010, 04:50 PM
#14
Registered
Join Date: Apr 2008
Location: Afton,OK
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
The TX is running strong. Only had it out once this year and got 86 mph out at Skiatook. Been taking the 27 out most of the time. Going to try and make it to Quachita, but it will be a last minute deal. You?
07-30-2010, 07:57 PM
#15
Platinum Member
Platinum MemberThread Starter
I will be at Ouachita in the SJ - I did a lot of work to the pump and mill in it. It is a lot of fun and runs a lot better. It isn't a TX but it runs pretty strong for a Taylor! HA.
I got the Performance Trial info from Fountain today. The boat came with 4 blade 27's and supposedly ran 80 on the gps from the factory. I will be more impressed if it can really run 60 at 3900 rpms! If it runs stong this weekend - some labbed 28's might be the ticket.
I got the Performance Trial info from Fountain today. The boat came with 4 blade 27's and supposedly ran 80 on the gps from the factory. I will be more impressed if it can really run 60 at 3900 rpms! If it runs stong this weekend - some labbed 28's might be the ticket.
08-09-2010, 01:22 PM
#20
Gold Member
Gold Member
Join Date: Jun 2008
Location: Broken Arrow, OK
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Hey Condor are you keeping the new boat up on Grand??? If so what part? I am in Hammerhead, would like to see that thing in person sometime if I see ya out there......
