Ilmor 625 in a 29
03-21-2013, 07:10 PM
#101
Registered
Thread Starter
Join Date: Apr 2011
Location: Vero Beach, FL
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
I'm looking at my performance report from Fountain, stock with a XR there is a "19" in the blank after X-demention. I'm assuming that's 19 centimeters if that isn't a typo. That would mean about 7 1/2 inches stock minus 2 inches for my current setup. Does that sound right?
03-23-2013, 11:30 PM
#102
Registered
19" should be the distance from the bottom of the hull to the crank centerline i.e your X dimension. With the stock bravo lower your propshaft should be around 3" below the bottom of the hull.
With the -2 you must be around 1" below. Try to space down 1".
With the -2 you must be around 1" below. Try to space down 1".
03-24-2013, 10:24 AM
#103
Registered
Thread Starter
Join Date: Apr 2011
Location: Vero Beach, FL
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Gotcha, I guess I was under the wrong impression of what the x dimension was.
