Ilmor 625 in a 29
#41
Registered
#42
Registered
Thread Starter
Join Date: Apr 2011
Location: Vero Beach, FL
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
#45
Registered
Join Date: Jan 2007
Posts: 1,667
Likes: 0
Received 0 Likes
on
0 Posts
Launch ramps are free but no fresh water (that's legal).
I'm stoked about Spin's upgrade.
#46
Registered
Thread Starter
Join Date: Apr 2011
Location: Vero Beach, FL
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
The outdrives on and the engines installed!! They're still finishing up a couple of things like the hydraulic steering and the exhaust tips. I'm hoping we're going to be able to water test her this week!
http://i1215.photobucket.com/albums/...r/AEECA4B2.jpg
http://i1215.photobucket.com/albums/...r/5DBF03BC.jpg
http://i1215.photobucket.com/albums/...r/F410382D.jpg
http://i1215.photobucket.com/albums/...r/AEECA4B2.jpg
http://i1215.photobucket.com/albums/...r/5DBF03BC.jpg
http://i1215.photobucket.com/albums/...r/F410382D.jpg
#49
Registered
Thread Starter
Join Date: Apr 2011
Location: Vero Beach, FL
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
We're thinking high 80's low 90's but I'll be sure to post when we water test it.
As far as the X dimension goes we're going to run it and see how it handles. We think we may need to swap the lower out with a shorty on but we'll see.
As far as the X dimension goes we're going to run it and see how it handles. We think we may need to swap the lower out with a shorty on but we'll see.