price???for bladder tank replacement
05-02-2012, 07:20 PM
#1
Registered
Thread Starter
Join Date: Aug 2001
Location: lake of the ozarks,missouri
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
price???for bladder tank replacement
2005 42 fountain poker run bladder tanks leaking as they all did,whats the cost to cut out floor and replace with new ,anybody thats had to have it done.i understand they made 13 of these with 8 being here in the states and 3 at lake of the ozarks,thanks for all answers,wes
05-07-2012, 07:53 PM
#6
Registered
Thread Starter
Join Date: Aug 2001
Location: lake of the ozarks,missouri
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
absolutley not ,just the crappy fiberous bladder tanks from atl and the way they were installed by fountain.
failure in the first 5 years for an 80 lb weight savings and tanks alone are $6000.00 plus labor and fiberglass work i would think a class action lawsuit should be in order,my 2-cents
failure in the first 5 years for an 80 lb weight savings and tanks alone are $6000.00 plus labor and fiberglass work i would think a class action lawsuit should be in order,my 2-cents
05-08-2012, 07:56 AM
#8
Registered
I had Fountain change mine to aluminum last winter. There was over 50 gallons of fuel in the sub floor from the leaking bladders.
Its very expensive to change out and it be done right. I'm so happy I did it though!
Its very expensive to change out and it be done right. I'm so happy I did it though!
absolutley not ,just the crappy fiberous bladder tanks from atl and the way they were installed by fountain.
failure in the first 5 years for an 80 lb weight savings and tanks alone are $6000.00 plus labor and fiberglass work i would think a class action lawsuit should be in order,my 2-cents
failure in the first 5 years for an 80 lb weight savings and tanks alone are $6000.00 plus labor and fiberglass work i would think a class action lawsuit should be in order,my 2-cents
05-08-2012, 01:31 PM
#9
Registered
Join Date: Apr 2011
Location: Vero Beach, FL
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
05-09-2012, 07:33 AM
#10
Registered
4K for each aluminum tank to start...you can imagine the labor to remove bladders, suck out all the fuel below subfloor, remove entire cockpit to cut holes for tanks, install gas tanks, subfloor and upholstery.
