Go Back  Offshoreonly.com > Owners Forum > Fountain
47 Lightning Imco SC #6 props >

47 Lightning Imco SC #6 props

Notices

47 Lightning Imco SC #6 props

Thread Tools
 
Old 06-27-2012, 07:56 AM
  #1  
Registered
Thread Starter
 
Join Date: Sep 2007
Location: peabody, ma-port st lucie, fl
Posts: 330
Likes: 0
Received 1 Like on 1 Post
Default 47 Lightning Imco SC #6 props

I finally got my drives back and props from Hering. Should be water testing this weekend. Also got my dash panels back from Innotech. Hope this setup works for me. It will definitely work 100% better than the 7 blade Herings and
1 1/4 prop shafts I was originally going to use that would probably end up on the bottom of the ocean with 10 to 15 hours of use. And probably wouldn't been able to get on plane being 2 1/2 inches prop shaft above bottom.
Attached Thumbnails 47 Lightning Imco SC #6 props-47lightningdrives.jpg   47 Lightning Imco SC #6 props-47lightningdrives2.jpg   47 Lightning Imco SC #6 props-47lightningdash.jpg  

47 lightning is offline  
Old 06-27-2012, 08:13 AM
  #2  
Registered
 
Join Date: May 2007
Location: Georgetown, TX
Posts: 1,272
Likes: 0
Received 0 Likes on 0 Posts
Default

why a Bravo in the center?
Griswald is offline  
Old 06-27-2012, 08:30 AM
  #3  
Registered
 
Join Date: Aug 2008
Location: Wild n Reckless From North Texas
Posts: 775
Likes: 0
Received 1 Like on 1 Post
Default

Whos #6 shaft are those and do they use same carrier?
Pokher Ace is offline  
Old 06-27-2012, 08:38 AM
  #4  
Registered
 
Join Date: Oct 2007
Location: minnesota
Posts: 1,563
Received 0 Likes on 0 Posts
Default

Originally Posted by 47 lightning
I finally got my drives back and props from Hering. Should be water testing this weekend. Also got my dash panels back from Innotech. Hope this setup works for me. It will definitely work 100% better than the 7 blade Herings and
1 1/4 prop shafts I was originally going to use that would probably end up on the bottom of the ocean with 10 to 15 hours of use. And probably wouldn't been able to get on plane being 2 1/2 inches prop shaft above bottom.
Finally , hope things work out for you , keep us informed
575cat is offline  
Old 06-27-2012, 08:52 AM
  #5  
Registered
 
Join Date: Jan 2008
Location: San Diego
Posts: 2,357
Likes: 0
Received 2 Likes on 2 Posts
Default

WOW that is frickin' beautifull !!!!
mcprodesign is offline  
Old 06-27-2012, 08:53 AM
  #6  
Registered
 
Join Date: Jan 2008
Location: San Diego
Posts: 2,357
Likes: 0
Received 2 Likes on 2 Posts
Default

A video of it Idleing would be Awesume
mcprodesign is offline  
Old 06-27-2012, 09:04 AM
  #7  
Registered
Thread Starter
 
Join Date: Sep 2007
Location: peabody, ma-port st lucie, fl
Posts: 330
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Griswald
why a Bravo in the center?
steering plate will not fit imco never had a problem with it .before the xr i was using a xz and it held up
47 lightning is offline  
Old 06-27-2012, 09:25 AM
  #8  
Registered
 
Join Date: Oct 2007
Location: minnesota
Posts: 1,563
Received 0 Likes on 0 Posts
Default

I hope the drive internals will take the load of those big wheels , are those 17s and what size is the center ?
575cat is offline  
Old 06-27-2012, 09:52 AM
  #9  
Registered
Thread Starter
 
Join Date: Sep 2007
Location: peabody, ma-port st lucie, fl
Posts: 330
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by 575cat
I hope the drive internals will take the load of those big wheels , are those 17s and what size is the center ?
18 x34x18 rake outers 17x35x18 rake center.iam more worried about the ginble rings helmets etc

Last edited by 47 lightning; 06-27-2012 at 09:55 AM.
47 lightning is offline  
Old 06-27-2012, 10:29 PM
  #10  
Registered
 
Join Date: Oct 2011
Location: ontario canada
Posts: 131
Likes: 0
Received 0 Likes on 0 Posts
Default

sweet pics vids would be better
mikesystem01 is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.