32 Fever Hull vibration
04-30-2013, 09:29 PM
#33
Registered
04-30-2013, 09:33 PM
#34
Ginger or Mary Ann?
Charter Member
Will your hatch close? Looks close, unless your hatch has the insert
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
05-01-2013, 06:27 AM
#35
Gold Member
Gold Member
I was concerned. There is a 1/2" clearence from the top of the pipes. I don't think the stock hp500 air cleaners would have fit. I had to raise up the exhaust holes 1".
Last edited by glen george; 05-01-2013 at 06:29 AM.
05-01-2013, 07:20 AM
#36
Registered
I ended up installing stainless turn downs,,$200.00 for all four,they are actually Diesel truck tips,,I finally put the boat in the water yesterday,it took 90% of the vibration away,,you can see by the picture below how now the exhaust exits out from under the swim platform ..as you can tell the water is very high so lakes are shut down,,I think all the vibration will be gone once in gear and the boat is moving
Last edited by boatnt; 05-01-2013 at 09:45 AM.
05-01-2013, 08:09 AM
#37
Registered
I ended up installing stainless turn downs,,$200.00 for all four,they are actually Diesel truck tips,,I finally put the boat in the water yesterday,it took 90% of the vibration away,,you can see by the picture below how now the exhaust exits out from under the swim platform ..as you can tell the water is very high so lakes are shut down,,I think all the vibration will be gone once in gear and the boat is moving
05-01-2013, 08:23 AM
#38
Registered
05-01-2013, 08:43 AM
#39
Gold Member
Gold Member
I relocated my batterys forward into the side compartments, removed the silent choice and other parts. Hoping to raise mine up a little. I will post new pictures soon.
05-01-2013, 05:57 PM
#40
Registered
Join Date: Aug 2006
Location: Ontario, OH
Posts: 2,465
Likes: 0
Received 0 Likes
on
0 Posts
More expensive than the rubber but could look decent with a polish or a scotch brite satin.
http://www.ebay.com/itm/4-stainless-...80a38a&vxp=mtr
http://www.ebay.com/itm/4-stainless-...80a38a&vxp=mtr
