Help with paint or pin striping...
#1
Registered
Thread Starter
Join Date: Jun 2013
Location: Minnesota
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Help with paint or pin striping...
Got a new tow rig and want to either wrap my fountain or add some pin striping so it matches the truck. I am that kind of person! Help me with some ideas.... See attached pics
#5
Registered
Even if you could keep the design similar but change the stripe to red and leave the checkered part black.
Last edited by 12meter joe; 12-11-2013 at 06:17 PM.
#6
Forum Regulator
VIP Member
Have the graphics sanded down smooth and repaint the associated area with more modern red and black graphics. Any body shop should be able to do this.
#7
Registered
Move your truck, your parked on the hose. Have a red pinstripe put on the boat graphics. Have the truck pinstriped with the same graphics, nothing big-suttle.
#8
Registered
Thread Starter
Join Date: Jun 2013
Location: Minnesota
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
I agree with most of you, I am going to add a maybe 1/2 to 1 inch accent to the checkered on the boat and see how that looks. Suddle yet it will flow I think. Maybe add some black pin striping to the truck.
#9
Registered
Join Date: Dec 2010
Location: Port Deposit Md
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
I agree with painting the trailer red, Either totally redo the graphics or maybe just add some red stripes on either side of the current graphics and fill in the checkered area with red and it is a royal pain to get all the grab handles and rails off, But powdercoat them red to match. I powder coated mine blue to match my graphics and it POPs. The grab rails aft are a royal pain!!!