Drive Trim Spacer
07-18-2014, 04:26 PM
#1
Registered
Thread Starter
Drive Trim Spacer
Which way is the drive trim spacer placed for a 27 Fountain Fever. I had my drive out for a yoke seal and I cannot remember.
I think it was in the forward most position. I know it is an adjustment to limit down trim by placing it in the front or rear.
I think it was in the forward most position. I know it is an adjustment to limit down trim by placing it in the front or rear.
07-21-2014, 10:49 AM
#2
Registered
Thread Starter
I found my answer. Bravo I and II have the spacer forward of the shaft (standard location) placing spacer to rear of shaft (optional location) will limit the amount of trim under. Bravo III have spacer located behind shaft.
I looked at paint wear and determined that my spacer was in the standard location.
I looked at paint wear and determined that my spacer was in the standard location.
