Go Back  Offshoreonly.com > Owners Forum > Fountain
NON step 35 Top Speeds >

NON step 35 Top Speeds

Notices

NON step 35 Top Speeds

Thread Tools
 
Old 03-14-2017, 03:40 PM
  #41  
Registered
 
Join Date: Feb 2008
Location: Connecticut
Posts: 6,662
Received 116 Likes on 71 Posts
Default

Originally Posted by 253
approx. 8,000# dry, then add 160 gal. gas, 2 riders, 2 anchors, toolbox, 2 coolers, 50# of misc. stuff you never use and old flat bottom 35's get heavy, but still run very well.
Do you 35 flat bottom guys run Bravo1 props or Hydromotive?
kreed is offline  
Old 03-14-2017, 04:31 PM
  #42  
Registered
 
Join Date: Jul 2009
Location: Taunton Ma
Posts: 8,527
Received 700 Likes on 342 Posts
Default

5.6% slip with 1.36 gears and 6000 rpm.... Good luck
Unlimited jd is offline  
Old 03-14-2017, 05:09 PM
  #43  
Registered
 
Join Date: Mar 2012
Location: Cape coral, FL
Posts: 4,189
Received 55 Likes on 34 Posts
Default

Originally Posted by Wildman_grafix
ICU on here ran his 95 step hull across the scales and I think it came in around 8600-8800. That was with bravos.


Remember these 33-35 fountains are fly weight 30 foot boats.
Phil it was 9500ish for the boat.
Crude Intentions is offline  
Old 03-14-2017, 06:38 PM
  #44  
VIP Member
VIP Member
 
Join Date: Jan 2005
Location: Cincinnati ,Ohio
Posts: 368
Received 2 Likes on 2 Posts
Default

Originally Posted by kreed
Do you 35 flat bottom guys run Bravo1 props or Hydromotive?
I have a set of both the hydros are a couple miles per hour faster and are fun to drive use mostly for poker runs and the bravos give me a better cruise speed at a lower rpm mine turn out.
tman is offline  
Old 03-14-2017, 06:56 PM
  #45  
Platinum Member
Platinum Member
 
Join Date: Apr 2005
Location: St.Peters,Mo/5mm LOTO/LEOPA
Posts: 1,282
Received 178 Likes on 103 Posts
Default

when we raced the konrad fountain of youth it was 9260 lbs hanging on the crane with nothing in it and 30 gallons of fuel in each tank ready to race. that was a 86 10 meter. that boat and my 92 35 prefer hydromotives.
flat rate is offline  
Old 03-14-2017, 08:52 PM
  #46  
Registered
 
Join Date: Sep 2012
Location: New Bern, NC
Posts: 616
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 1428turbo
110mph.....35 lightning...blown 540s.....1000hp each.....upriver.....hydromotive 28s.
Must have been on the Pamlico
Brandonb_05 is offline  
Old 03-14-2017, 09:50 PM
  #47  
Registered
 
Join Date: Feb 2017
Posts: 75
Likes: 0
Received 0 Likes on 0 Posts
Default

i cannot wait to see what mine will run once motors are done....im hoping 80mph
93fountainsig35 is offline  
Old 03-15-2017, 07:50 AM
  #48  
Registered
 
Join Date: Feb 2008
Location: Connecticut
Posts: 6,662
Received 116 Likes on 71 Posts
Default

Originally Posted by tman
I have a set of both the hydros are a couple miles per hour faster and are fun to drive use mostly for poker runs and the bravos give me a better cruise speed at a lower rpm mine turn out.
What HP are you running and what size Hydros?
kreed is offline  
Old 03-15-2017, 07:52 AM
  #49  
Registered
 
Join Date: Feb 2008
Location: Connecticut
Posts: 6,662
Received 116 Likes on 71 Posts
Default

Originally Posted by 93fountainsig35
i cannot wait to see what mine will run once motors are done....im hoping 80mph
What are you putting in for engines?
kreed is offline  
Old 03-15-2017, 08:39 AM
  #50  
Registered
 
Join Date: Jul 2009
Location: Taunton Ma
Posts: 8,527
Received 700 Likes on 342 Posts
Default

509's Canfield heads, crane 168811 cams should be 620 or so
Unlimited jd is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.