27 Fountain side windshield plexiglass question
12-11-2016, 08:21 AM
#1
Registered
Thread Starter
Join Date: Mar 2006
Location: Lake George NY
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
27 Fountain side windshield plexiglass question
Anyone replaced side plexiglass windshields on 27 Fountain. My question is are they held in place with screws or are they machine screws with nuts behind.
VIP Member
12-11-2016, 06:45 PM
#3
Registered
Join Date: Jun 2010
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Both,, just did mine. Stainless screws around the bottom and machine up in the front corners where it meets the front. Be Careful not to over tighten and don't lose any of the rubber grommets around the screw when you take off your old one
12-11-2016, 06:47 PM
#4
Registered
Join Date: Jun 2010
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Both, just did mine. Stainless wood style screws around the bottom and machine screws up front where the plastic corner braces meet the front. Be careful not to over tighten and don't lose the rubber grommets when you take it apart
12-11-2016, 07:26 PM
#5
Registered
Thread Starter
Join Date: Mar 2006
Location: Lake George NY
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for info. Did you order new ones from Fountain or have them made. How much do they go for.
