hogie roll

All 3 as in executioner? Wow. I heard those were an older bottom.

My question was is the freeboard the same? Height from the bottom of the boat up to the rub rail. Thanks

Reggie Fountain

The Lightning, Executioner & Poker Run Edition all used the same hull. The same freeboard for all three, the poker run edition was not cut down. Only the Raceboats were cut down.

Snowflake

Motors are almost back together, Just waiting on a few fittings from whipple! Then we will see what kind of numbers we put down

dykstra

Any updates on this BAD unit??!!

Snowflake

Motors are done, just waiting on injectors so we can get some dyno/tune time. Bringing the boat to glass Dave the 28th to glass in the ballast tank pickup and add two teague -16 adjustable pickups for chillers.

bencini231

You will love the 3.8 Whipples!! You will probably be suprised when you run them and there is no whine to them. I have had mine for 2 yrs and have had zero issues.

IGetWet

Wait wait wait, no whine with the 3.8s?! That’s no good.

bencini231

I call it stealth mode..lol

glassdave

good meeting you and seeing the boat again, thanks for bringing it out and glad i could help. This is rarely said in this biz but that went pretty easy and quick lol (thanks for the beers btw)

Brad Christy

Bencini,

Isn't the blower whine primarily the cog belt; the air pulsing out of the cogs as the belt closes in? Multi-vee belts don't whine, right? I hear a slight bit of gear whine with my ProCharger, but the multi-vee is whisper quiet. Someone told me years ago that, if you drill holes in the valleys of the cogwheels that the bulk of the whine goes away. I've never seen one done to verify, though.

Thanks. Brad.