BAM's Cyborg NEXT (upgrade from NXT transmission)
#1
Registered
Thread Starter
Join Date: Jul 2006
Location: St. Clair Shores, MI
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Hello,
Happy Fall - anyone know of a 38 or 42 700 boat upgrading to the Cyborg NEXT package from BAM? Looks interesting, curious how the 42 in particular responds to the additional drive setback.
Here's the link for anyone curious about the kit:
https://www.cyborgtransmissions.com/...ts/Cyborg-NEXT
Thanks,
Jeremy
Happy Fall - anyone know of a 38 or 42 700 boat upgrading to the Cyborg NEXT package from BAM? Looks interesting, curious how the 42 in particular responds to the additional drive setback.
Here's the link for anyone curious about the kit:
https://www.cyborgtransmissions.com/...ts/Cyborg-NEXT
Thanks,
Jeremy
#2
Registered
![Default](/forums/images/icons/icon1.gif)
I don't know of anyone who did the Cyborgs, but Mike Clesceri did the Huber 1450's (I think that's what they were?) in his torn flag graphics 42 Lightning. Boat runs close to 110mph, I think?
The boat is now in Kentucky at Day's Boat Sales (Bill Day).
The boat is now in Kentucky at Day's Boat Sales (Bill Day).
The following users liked this post:
Got Freedom? (09-29-2020)
#3
Registered
![Default](/forums/images/icons/icon1.gif)
I would see if bam would sell you the tail stock and the extension box. The other stuff you should be able to source on the secondary market for a lot cheaper than new.
#4
Registered
![Default](/forums/images/icons/icon1.gif)
Boxes are built to order so plan ahead