502 mag mpi in 2000 Fever 32'
#4
Registered
#7
Registered
I have HP500EFI in my 2000 32. The first non step hulls were no to bad, then they cut small steps in and reduced the flotation. They sit lower.
1999/2000 time frame they went big step and they sit even lower.
1999/2000 time frame they went big step and they sit even lower.
The following users liked this post:
uluru (05-12-2022)
#10
Registered
Thread Starter
Thanks all.
I just put an offer in on a 2000 - 32 with black 502s subject to the ususal survey, mechanical inspection and Sea trial.
320 actual hours on motors. Never opened.
Very similiar boat to my 29' 1998 with 454s but with a bigger step and 3'
I just put an offer in on a 2000 - 32 with black 502s subject to the ususal survey, mechanical inspection and Sea trial.
320 actual hours on motors. Never opened.
Very similiar boat to my 29' 1998 with 454s but with a bigger step and 3'