blower pullies needed
#1
Registered
Thread Starter
Join Date: Jan 2003
Location: FINGER LAKES N.Y.
Posts: 800
Likes: 0
Received 0 Likes
on
0 Posts
blower pullies needed
can any of you readers tell me where I can get a pair of stock 101/2 " blower pullies for a 525. mine have been changed and with out chillers some thing will let go. I want to slow the blower down. We are not racing and dont pan on making any money, just want the motors to last. 300. plus is alittle steep for just one stock merc pully. 700 to 800 is alot of gas. High boost really hurts the back pocket.
#3
Xtreme Cooler Test Dumby
Platinum Member
Join Date: Sep 2001
Location: Watkins Glen, New York
Posts: 1,442
Likes: 0
Received 0 Likes
on
0 Posts
You might be able to get a pair at ACE Hardware or perhaps Walmart. They have an exceptional variety of pullies for blower motors. Last time I checked they almost had every part needed to build a 1200 Sterling. They also have a wide variety of Fountain steering wheels.......Already D!ckin' with that thing?? I tell you what I'll do, You clean up your boat really good (make sure it's filled with gas) and load it on the trailer. Now hook your truck to it ( Make sure you wash your truck) . Now your ready to swap me for the Baja. Since you'll be leaving the truck, I'll even be a hell of a nice guy and take the Baja down to the lake and unload it . If you act RIGHT NOW I'll throw in a couple of slices of pie.
Just bustin' Balls
Flipper
Just bustin' Balls
Flipper
#4
Registered
Thread Starter
Join Date: Jan 2003
Location: FINGER LAKES N.Y.
Posts: 800
Likes: 0
Received 0 Likes
on
0 Posts
Back for more , mine takes the new style. the pully is not recessed deep like the old style. as for spline I have not taken them off yet. the motors are 1997 525sc. k000000- series
Thread
Thread Starter
Forum
Replies
Last Post
customryder
General Boating Discussion
3
04-24-2005 01:50 PM