Bluprinting My Hull and...........
12-02-2003, 08:28 PM
#36
Registered
Thread Starter
Join Date: Feb 2001
Location: Portage,IN
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
Paul is putting on the finishing touch to tape
off the boat for tomarrow's gel coating.
Unfortunately I will not be able to get
over to Capt'n Nabbers tomarrow....
off the boat for tomarrow's gel coating.
Unfortunately I will not be able to get
over to Capt'n Nabbers tomarrow....
12-02-2003, 08:38 PM
#37
Registered
Thread Starter
Join Date: Feb 2001
Location: Portage,IN
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
....But while I'm gone I know my boat will be secure,
meet "TANK"
Not to worry,
He's a great guy and he loves treats
Until next week*******Adios My Friends
meet "TANK"
Not to worry,
He's a great guy and he loves treats
Until next week*******Adios My Friends
Last edited by StrikinLightnin; 12-02-2003 at 08:58 PM.
12-03-2003, 08:22 AM
#39
Registered
Thread Starter
Join Date: Feb 2001
Location: Portage,IN
Posts: 538
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Dan,
I've decided that since the boat
is already over there and the side windshield
panels are off,
I'm going to pull the interior and have
all the cracks repaired around the windshield
and race hatch area.
When Fountain installed the windshield,
the screw holes weren't chamfered.
This allowed the 'glass to crack.
I've decided that since the boat
is already over there and the side windshield
panels are off,
I'm going to pull the interior and have
all the cracks repaired around the windshield
and race hatch area.
When Fountain installed the windshield,
the screw holes weren't chamfered.
This allowed the 'glass to crack.
