super chillers?
12-11-2003, 09:36 PM
#1
Platinum Member
Platinum MemberThread Starter
super chillers?
I have a bone stock 1997 29' Fever with a 525SC. Are the super chillers worth it? Is the only difference between a 525SC and a 600SC the intercooler?
Last edited by thedykstras; 12-11-2003 at 09:39 PM.
12-11-2003, 10:54 PM
#2
Ginger or Mary Ann?
Charter Member
525SC is a 454, the 600SC is a 502
And welcome aboard
And welcome aboard
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
12-18-2003, 06:52 AM
#6
Registered
Join Date: Feb 2002
Location: Lake Michigan
Posts: 6,627
Likes: 0
Received 0 Likes
on
0 Posts
Saw it done on a 47 Fountain and it just made more noise.
I wouldn't waste my time with dropin one under that blower...It would take too much to push it through, your better off with an 8-71 @ 7psi. and a MSD ignition all in by 2500, it will throttle like a monster.
I wouldn't waste my time with dropin one under that blower...It would take too much to push it through, your better off with an 8-71 @ 7psi. and a MSD ignition all in by 2500, it will throttle like a monster.
12-18-2003, 07:24 PM
#7
Ginger or Mary Ann?
Charter Member
Are you sure there is enough clearance below the hatch to allow a chiller?
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
12-28-2003, 03:08 PM
#9
Ginger or Mary Ann?
Charter Member
'99 32'.
Back to the hatch clearance issue.......
I had a '94 27' with a blower and only had an inch or 2 clearance with no chiller. A speed shop guy I used had a '97 or '98 27 Fever with same blower setup as me and he had to build the hatch up 2" to clear the arrestor. The newer yrs have the motors mounted higher, so I expect you may have the same issues???
Back to the hatch clearance issue.......
I had a '94 27' with a blower and only had an inch or 2 clearance with no chiller. A speed shop guy I used had a '97 or '98 27 Fever with same blower setup as me and he had to build the hatch up 2" to clear the arrestor. The newer yrs have the motors mounted higher, so I expect you may have the same issues???
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
