Broken Engine Area Lights
#1
Registered
Thread Starter
Join Date: Mar 2004
Location: California
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Broken Engine Area Lights
Besides replacing the same lights every 5 minutes, has anyone found a light that will not break it's mounting bracket in the engine area. Mine is a 1997 29 single.
#4
Ginger or Mary Ann?
Charter Member
Re: Broken Engine Area Lights
Both of mine also broke at the pivot point.
I made new bases out of teflon. Look exactly like the originals but will not break since teflon is not hard and brittle like the original plastic.
I made new bases out of teflon. Look exactly like the originals but will not break since teflon is not hard and brittle like the original plastic.
#6
Registered
Join Date: Nov 2003
Location: Melbourne, FL
Posts: 1,243
Likes: 0
Received 0 Likes
on
0 Posts
Re: Broken Engine Area Lights
I'm swithcing mine over to the LED strip lights--found them at West and discount stores ofr boat trailers. They are 4-LED strips and totally sealed. They use significantly less current and seem like corrosion cna't happen.
Poorsche
www.boatmat.com
Poorsche
www.boatmat.com
#8
Re: Broken Engine Area Lights
If you haven't broken those chincy lights from the factory
you're not running full out!!!
I've gone through a few then switched to these.............
http://www.westmarine.com/webapp/wcs...235&storeNum=9
They kick azz
you're not running full out!!!
I've gone through a few then switched to these.............
http://www.westmarine.com/webapp/wcs...235&storeNum=9
They kick azz