1999 lightning parts
#11
Re: 1999 lightning parts
i went to the platicks store in kc and macthed verry close i bought a heat strip and fabed doors and windoes for 350 bucks as fountaion 1800 just for the windsheild
#12
Platinum Member
Platinum Member
Thread Starter
Join Date: May 2003
Location: Andover, Ohio
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1999 lightning parts
Do you mean heat gun?? Just now getting around to the interior. As rounded up HP gimble upgrades,other outdrive parts. Chris at sterndrivespec. in NY. has been very helpful.
#13
Platinum Member
Platinum Member
Thread Starter
Join Date: May 2003
Location: Andover, Ohio
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1999 lightning parts
By the way, I found both bolster motors were shot. Motion systems corp. in New Jersey has the motors . 732-222-1800
#15
Platinum Member
Platinum Member
Thread Starter
Join Date: May 2003
Location: Andover, Ohio
Posts: 134
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1999 lightning parts
Thanks for asking. Replaced all breakers, trim units. Thought the end was near then got upset with the trailer that came with it so went to Loadmaster in Port Clinton in April and had new trailer put under it. Was getting ready to set one engine in and got busy at work. Just getting ready to get motor aligned. Wish I had the stock tubular mounts that fountain use to make. Now with the stock merc offshore mounts , must use new alum angles and redrill. I am sure it will just be time consuming. I am starting to wonder if this had boxes on it?? Will post some pictures soon. David