Lightnings with race fairings - need pics
01-30-2005, 08:49 AM
#1
Registered
Thread Starter
Join Date: Jul 2001
Location: Austin, TX
Posts: 928
Likes: 0
Received 0 Likes
on
0 Posts
Lightnings with race fairings - need pics
I am going to be installing a race fairing on my lightning in the next week or two and need some help with the fit and finish. If anyone has the time, I would certainly appreciate some close up pictures. It would be helpful if you could go all round the where the fairing mates to the deck on the inside and outside. As many as possible. Thanks, John
01-30-2005, 09:09 AM
#2
Registered
Join Date: Oct 2000
Location: Chesterfield Mo/Loto
Posts: 1,380
Likes: 0
Received 11 Likes
on
2 Posts
Re: Lightnings with race fairings - need pics
the race fairing fit just like the windshields screwed through and caulked on the out side. the inside has upholstry that wraps under the bottom and gives the finished look no caulk on the inside. the top of the fairing is a upholstried cap. my boats down at LOTO so i cant take pictures but if you have any question i'll try to answer them
later
later
01-30-2005, 04:43 PM
#3
Registered
Thread Starter
Join Date: Jul 2001
Location: Austin, TX
Posts: 928
Likes: 0
Received 0 Likes
on
0 Posts
Re: Lightnings with race fairings - need pics
Later, I believe that is the case for the aluminum fairings on the executioners and the Fevers, but the new lightnings are stud mounted through the deck.
