502 Gen 6 cast iron rect heads value ??
#1
VIP Member
Thread Starter
502 Gen 6 cast iron rect heads value ??
I've got two sets of the 502 Mag Gen 6 cast iron cylinder heads. I have switched to Edelbrock aluminum heads so I need to sell these. I will put them on Ebay, but I am not sure what the street value is today. One set was just redone and the other set only has 20 hrs time. I was thinking the redone set is worth around 750.00/pair and the one set with 20 hrs for around 600.00. Both sets are ready to bolt on and go, they just need rocker arms.
Am I close ? Give me some suggestions !!!
Dave
Am I close ? Give me some suggestions !!!
Dave
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Last edited by Bigwavz; 04-29-2005 at 09:50 AM.
#2
VIP Member
Thread Starter
Re: 502 Gen 6 cast iron rect heads value ??
Ttt
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
#4
Gone Fishin'
Charter Member
Join Date: Nov 2000
Location: Grand Rapids/Holland/Grand Haven
Posts: 7,408
Likes: 0
Received 0 Likes
on
0 Posts
Re: 502 Gen 6 cast iron rect heads value ??
I'd say they are worth whatever someone want's to pay you for them. I doubt you'll get $750 for them on ebay.
I'm going to have a set of gen5 heads soon... kinda wondering what they would be worth too... I was figuring when I finally get them off the motor they would be worth 250-300 or so without the roller rockers.
I'm going to have a set of gen5 heads soon... kinda wondering what they would be worth too... I was figuring when I finally get them off the motor they would be worth 250-300 or so without the roller rockers.
__________________
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
[b]M Go Blue.......Gator boots, gator luggage, gator purses... all at cut rate deals!!!!
#5
VIP Member
Thread Starter
Re: 502 Gen 6 cast iron rect heads value ??
Bump again
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
#6
Registered
Re: 502 Gen 6 cast iron rect heads value ??
I got 800.00 for one pair of freshened Merlins w/inconel and 600.00 for the other. It took a long time too. I'd say about 500.00 pr.