Ideas welcomed~trim ring for base of hatch scoops??
#11
Registered
Thread Starter
Re: Ideas welcomed~trim ring for base of hatch scoops??
Originally Posted by BruceK
They were originally done in marine plywood, but since I just had them recovered, the upholstry guy made them out of some plastic which they use for all of the seats and marine upolstry. Here are a few pics
#12
Registered
Thread Starter
Re: Ideas welcomed~trim ring for base of hatch scoops??
Originally Posted by PhantomChaos
Email "Jeffrey"......he's added scoops to each boat he's had and some didn't have blowers.
Don't forget (like he did) that what goes in must come out!!! On the Gladiator, he didn't have enough exit for air rushing in the scoops and blew off the hatch at speed. What a poodle!!!
Don't forget (like he did) that what goes in must come out!!! On the Gladiator, he didn't have enough exit for air rushing in the scoops and blew off the hatch at speed. What a poodle!!!
#13
Registered
Thread Starter
Re: Ideas welcomed~trim ring for base of hatch scoops??
Originally Posted by Sean H
i was getting ready to add to make sure you had a way for an equal amount of air to get out.....
#14
Neno the mind boggler
VIP Member
Re: Ideas welcomed~trim ring for base of hatch scoops??
Originally Posted by Sean H
i was getting ready to add to make sure you had a way for an equal amount of air to get out.....
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#16
A to Z
Platinum Member
Re: Ideas welcomed~trim ring for base of hatch scoops??
Originally Posted by glassdave
ya mean like not filling every damn vent hole in the boat and drilling 3 measley holes in the back
exactly like that.... now get back to work....
you didn't fill the exhaust holes did ya?