Alarm=engine Cutting Out!!!
#1
Registered
Thread Starter
Join Date: Mar 2004
Location: LOCKPORT, N.Y.
Posts: 689
Likes: 0
Received 0 Likes
on
0 Posts
Alarm=engine Cutting Out!!!
I just had this start happening. My alarm will go off and at the same time my motor will cut out 4,000rpms drop to like 3,000 then jump back up....... I checked everything I could but need to know what sensors trip the alarm and will cut the ignition? I know it is not the drive res. because I unplugged them and it still did it. Thanks
2000' 454mag mpi
2000' 454mag mpi
#3
Registered
Thread Starter
Join Date: Mar 2004
Location: LOCKPORT, N.Y.
Posts: 689
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alarm=engine Cutting Out!!!
Did your gauge show a hot condition because my gauges all read normal. I just have to track down which alarm sensor is bad and cause it to cut the igniton for a split second.
#6
Platinum Member
Platinum Member
Join Date: Jul 2001
Location: Lincolnshire IL
Posts: 882
Likes: 0
Received 0 Likes
on
0 Posts
Re: Alarm=engine Cutting Out!!!
Try the ignition switch. I had a similar issue and the switch was bad. If you wiggle the key while running, the engine would do the same. Just another idea.